Operations

COOLNOMIX® operational status can be determined either by direct observation of the LED lighting sequence on the outside of the unit itself or by using the COOLNOMIX® Connect mobile application.

LED lighting sequence (direct observation)

Steady GREEN & Flashing RED -  Cooling. Relay is closed. Minimum 3 minute duration.

Flashing GREEN -  Cooling paused for savings. Relay is open. Minimum 3 minute duration.

Alternating GREEN & RED Flashing - Cooling system is undersized or requires servicing. 

Continuous RED - System or unit failure.

Flashing GREEN & Steady RED - Heating mode detected.  COOLNOMIX® in bypass mode.

No Lights On – No power.  Relay is closed.

COOLNOMIX® Connect

COOLNOMIX® Connect allows real-time access to COOLNOMIX® operational status. Once connected, the log file provides the necessary information to know the COOLNOMIX® operational status.

Mode: C Relay: On State: Enable Temperature Sensors: Positive Values Status: Cooling. Relay is closed. Minimum 3 minute duration.

Mode: C Relay: Off State: Enable Temperature Sensors: Positive Values Status: Cooling paused for savings. Relay is open. Minimum 3 minute duration.

Mode: A Relay: On State: Enable Temperature Sensors: Positive Values Status: Cooling system is undersized or requires servicing

Mode: A Relay: On State: Disable Temperature Sensors: Positive Values Status: Unit failure.

Mode: C Relay: On State: Enable Temperature Sensors: Negative Values Status: System failure (e.g. losing sensor)

Mode: D Relay: On State: Enable Temperature Sensors: Positive Values Status: Heating mode detected. COOLNOMIX® in bypass mode.

Unable to Connect : No power. Relay is closed.